Safety Instructions For Pneumatic Tools
10.USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching.
11.WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts.
12.ALWAYS USE SAFETY GLASSES.
Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.
13.ALWAYS WEAR RESPIRATOR OR DUST MASK when grinding, sanding, blowing compressed air, or any other activity that causes or stirs up dust.
14.WEAR APPROVED HEARING PROTECTION.
15SECURE WORK. Use clamps or a vise to hold work when practical. It is safer than using your hand and frees both hands to operate tool.
16.DO NOT OVERREACH. Keep prop- er footing and balance at all times.
17.MAINTAIN TOOLS WITH CARE.
Keep tools lubricated and clean for best and safest performance. Follow instructions for lubricating and changing accessories.
18.REDUCE THE RISK OF UNINTENTIONAL STARTING/ FIRING. DO NOT carry tool with hand on trigger and always discon- nect the air hose when not in use.
19.DISCONNECT TOOLS before ser- vicing and changing accessories.
20.USE THE RECOMMENDED ACCESSORIES. Consult the owner’s manual for recommended accessories. The use of improper accessories may increase the risk of injury.
21.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine if it will operate properly and per- form its intended function. Check for alignment of moving parts, bind- ing of moving parts, breakage of parts, mounting, and any other con- ditions that may affect its operation. Replace/repair any parts that may affect the proper operation of the tool.
22.NEVER LEAVE UNATTENDED TOOL CONNECTED TO AIR.
Disconnect the air hose and DO NOT leave tool unattended until it is relieved of any built up pressure.
23.NEVER ALLOW UNTRAINED USERS TO USE THIS TOOL WHILE UNSUPERVISED.
24.IF YOU ARE UNSURE OF THE INTENDED OPERATION, STOP USING THE TOOL. Seek formal training or research books or maga- zines that specialize in pneumatic tools.
Model H5977 (Mfg. Since 2/07) |
