Grizzly H6143 Clearing Jammed Nails, To clear a jammed nail from the dis- charge area

Models: H6143

1 20
Download 20 pages 23.77 Kb
Page 12
Image 12

Clearing Jammed

Nails

A jammed nail must be cleared before using the nailer again.

To clear a jammed nail from the dis- charge area:

1.DISCONNECT NAILER FROM THE AIR SUPPLY!

2.Pull back and latch the magazine pusher.

3.Remove the nail stick from the maga- zine.

4.Open the nailer nose by removing the rubber nose tip, squeezing the nose release mechanism (Figure 7), and opening the nose cover.

Nose Cover

Nose Release

Nose Tip

 

Figure 7. Nose opened to clear a jam.

5.Dislodge the jammed nail with a tool that will fit in the slot on the underside of the nose.

6.Throw the damaged nail away and insert a new nail stick that only contains clean, undamaged nails. DO NOT use dirty or damaged nails!

7.Release the catch lever and let the pusher slide to the front of the maga- zine.

-10-

H6143 16 Ga. Finish Nailer

Page 12
Image 12
Grizzly H6143 instruction manual Clearing Jammed Nails, To clear a jammed nail from the dis- charge area