![](/images/new-backgrounds/1314339/31433915x1.webp)
Compressed Air
System
The Model H6144 is designed to be oper- ated at
Before using your new nailer, install a
1⁄4" NPT male quick connect fitting (not included) on the nailer and a matching
1⁄4" NPT female fitting (not included) on the air hose. Regulate the air pressure on your air compressor to the minimum PSI for your model.
An
This filter/lubricator/regulator unit will protect your tool from damaging water
Exceeding the maximum permissible operating pressure may cause the nailer to explode, blowing metal frag- ments in all directions. To protect yourself from serious personal injury, DO NOT allow your air compressor to exceed the recommended pressure when connected to this nailer!
Check the current Grizzly catalog for avail- ability of this unit. If you plan on install- ing a filter/lubricator/regulator unit in your compressed air system, always follow the connection instructions that come with the unit.
Quick | Quick |
| Filter | |
Connector | Connector Oiler | |||
| ||||
Nailer |
|
|
| |
Quick |
|
|
| |
Coupler |
| Quick Regulator | ||
| Air Hose | |||
| Coupler |
| ||
|
|
|
Air
Compressor
Figure 2 . Filter/Lubricator/Regulator Unit.
H6144 34° Angle Finish |