Grizzly H6144 instruction manual Introduction, Foreword Contact Info, Machine Data

INTRODUCTION

Foreword Contact Info

We are proud to offer the Grizzly Model H6144 34º Angle Finish Nailer–2½". This model is part of a growing Grizzly family of fine pneumatic tools. When used accord- ing to the guidelines set forth in this man- ual, you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s commitment to customer satisfaction.

The Model H6144 is designed to toenail into corners and shoot at any angle. This nailer is ideal for door, window, exterior, and decorative trim, cabinet work, and fin- ish paneling. The Model H6144 features a 360° exhaust port, comfort grip rubber handle, economical air consumption with low noise, narrow nose for tight spots, and quick jam release mechanism.

The specifications, details, and photo- graphs in this manual represent the Model H6144 as supplied when the manual was prepared. However, owing to Grizzly’s pol- icy of continuous improvement, changes may be made at any time with no obliga- tion on the part of Grizzly.

Machine Data

Nail Size	15 gauge finish nails
Nail Length	1¼"-2½"
Magazine Capacity	40 Nails
Air Inlet	¼" NPT
Dimension	2.92" x 10.43" x 16.14"
Weight	5¼ lbs.
Operating Pressure	60-100 PSI

H6144 34° Angle Finish Nailer–2½"

If you have any comments regarding this manual, please write to us at the following address:

Grizzly Industrial, Inc.

C/O Technical Documentation

P.O. Box 2069

Bellingham, WA 98227-2069

Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: techsupport@grizzly.com

Web Site: http://www.grizzly.com

Read the manual before operation. Become familiar with this nailer, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not under- stood or followed.

-5-