Grizzly H6192 instruction sheet Assembly, Product Information, Inventory

MODEL H6192

RANDOM ORBITAL SANDER

INSTRUCTION SHEET

EYE INJURY HAZARD!

Always wear safety glasses when using this tool to prevent serious personal injury.

DUST HAZARD!

Always wear respirator when

using this tool.

INJURY HAZARD!

Always disconnect tool from

air to prevent unexpected operation during service.

DO NOT EXCEED 120 PSI! Personal injury could occur.

A

B

Figure 1. Model H6192 inventory.

Assembly

To assemble the Model H6192:

1.Install a 1⁄4" NPT male quick-connect fitting (not included) into the air inlet.

2.Attach a 5" hook and loop sanding disc to the sanding pad as shown in Figure 2.

Product Information

•10,000 RPM

•Requires 90 PSI

•Requires 5 CFM

•Requires 5" hook and loop sanding disc with 5-hole pattern

•1/4" NPT air inlet

•Weighs 2.4 lbs.

•11/4" Dust port

•Directional exhaust port

		Figure 2. Attaching sanding disc.
Inventory
A.	Orbital Sander	1
B.	Wrench	1

COPYRIGHT © AUGUST, 2006 BY GRIZZLY INDUSTRIAL, INC.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#BL8505 PRINTED IN TAIWAN