Model H7528, Resaw Fence for | Grizzly G0531 instruction

MODEL H7528

RESAW FENCE FOR

G0531/G0566/G0568/G0569

INSTRUCTION SHEET

Introduction

The Model H7528 Resaw Fence upgrades the	�
standard fence that came with the G0566/G0568.	�
Installing the resaw fence on your old fence
requires that you drill a hole in your old fence.

Inventory (Figure 1)			�
A.	Resaw Fence	1	�
A.	Resaw Fence	1
B.	Adjustment Handle	1	�	�
C.	Flat Washer 8mm	1	�	�
D.	Moving Plate	1
Drilling the Hole			Figure 1. Model H7528 inventory.

Before starting, you should have a pencil, a mea- suring tape, a center punch, a hammer, a 3/8" drill bit, and access to a drill press (a hand drill will also work, but results may vary).

To drill the hole in your fence:			��
To drill the hole in your fence:			��

1. Measure the center-point of the hole (see		��


Figure 2) and pencil it in on the face of the
fence.	��
	��

2.Use the center punch and hammer to indent the center-point on your penciled mark.

3. Observe all safety precautions given for your drilling method (refer to your Owner's Manual), and drill the hole completely through your fence.

Assembling Fence

Figure 2. Diagram for drilling the hole.

1.Insert the adjustment handle with washer through the hole in the fence and attach the

moving plate on the other side of the fence (Figure 3).

2. Slide the resaw fence over the moving plate,		Moving Plate
center it with your original fence, and lock it
center it with your original fence, and lock it
in position with the adjustment handle.
in position with the adjustment handle.		Figure 3. Installing resaw fence.
		Figure 3. Installing resaw fence.

3.Mount the fence assembly on the bandsaw.

H7528, G0531 specifications

The Grizzly G0531 is a versatile and powerful woodworking tool designed for serious carpenters and woodworkers seeking precision and efficiency in their projects. This table saw, known for its robust design and innovative features, caters to both professional and hobbyist woodworkers, offering a blend of performance, durability, and user-friendly operation.

One of the main features of the Grizzly G0531 is its spacious cast iron table, which measures 27 inches by 40 inches, providing ample workspace for various projects. The stability of the cast iron helps reduce vibrations during operation, resulting in smoother cuts and improved accuracy. The built-in extension wings further enhance the table's surface area, accommodating larger workpieces with ease.

Equipped with a powerful 2-horsepower motor, the G0531 can efficiently handle a wide range of cutting tasks, including ripping and crosscutting of hardwoods and softwoods. The two-speed operation allows users to select the optimal speed for their specific project, ensuring clean and precise cuts every time. Additionally, the saw features a 10-inch blade which is capable of cutting through thick materials effortlessly.

Safety is a priority in the design of the G0531, as it comes with an effective blade guard system that protects users from accidental contact with the spinning blade. The saw also features a riving knife that minimizes the risk of kickback while ensuring a smooth cut. User-friendly adjustments can be made through its front-mounted handwheel, enabling quick alterations to blade height and angle.

The G0531 incorporates advanced technology with its fence system, providing precise measurements and adjustments. The fence locks securely in place and allows for easy repositioning, contributing to the saw's ease of use. Furthermore, the saw's dust collection system is designed to minimize the mess created during cutting, ensuring a cleaner workspace.

Overall, the Grizzly G0531 stands out for its combination of power, precision, and safety features. By integrating user-friendly technologies and a sturdy construction, it addresses the needs of woodworkers aiming for both quality and efficiency in their work. Whether used in a professional workshop or a home garage, the G0531 is a reliable choice for those dedicated to the craft of woodworking.

Grizzly instruction sheet Model H7528, Resaw Fence for, G0531/G0566/G0568/G0569

Models: H7528 G0531

MODEL H7528

RESAW FENCE FOR

G0531/G0566/G0568/G0569

INSTRUCTION SHEET

Introduction

Figure 1. Model H7528 inventory.

Before starting, you should have a pencil, a mea- suring tape, a center punch, a hammer, a 3/8" drill bit, and access to a drill press (a hand drill will also work, but results may vary).

Figure 2) and pencil it in on the face of the

fence.

2.Use the center punch and hammer to indent the center-point on your penciled mark.

Figure 2. Diagram for drilling the hole.

1.Insert the adjustment handle with washer through the hole in the fence and attach the

moving plate on the other side of the fence (Figure 3).

2. Slide the resaw fence over the moving plate,

Moving Plate

center it with your original fence, and lock it

in position with the adjustment handle.

Figure 3. Installing resaw fence.

H7528, G0531 specifications