Model H7673 HVLP Spray Gun-10-
SECTION 4: OPERATIONS

Spraying

The Model H7673 HVLP spr ay gun i s
designed to spray low to medium solid
materials, like lacquers, s tains, primers,
multi-component paints, acr ylics, epox ies
etc. It is i deal for auto body touch-ups,
woodworking projects, or projects with
hard to reac h areas. I t is not for use with
any waterborne material.
To use your spray gun:
1. Read and follow the material manufac-
turer's instructions for spraying, mixing,
safety, disposal, and any other instruc-
tion on the label or Material Safety Data
Sheet (MSDS).
2. Ensure the cup is securely tightened
and all other fittings are secure to avoid
air leaks or material spills.
3. Set the inlet air pressure (the air com-
ing to the spray gun) to the lowest
pressure recommended in Tool Data
on Page 7 or to the material manufac-
turer's recommendations.
4. Adjust the atomizing cap to vertical or
horizontal. See Atomizing Cap and
Fan Adjustments on Page 12 for fur-
ther explanation.
5. Fill the cup with material.
6. Trial and error are necessary to achieve
the results you want along with a fair
amount of practice. Test your material
flow and spray pattern on a piece of
cardboard or some scrap of material
similar to your project.
EXPLOSION HAZA RD! D O NOT
smoke or have any source of flame
or spark near spraying. Vapors w ill
explode if ignited.
RESPIRATORY HAZARD! Always use
respirator rated for organic vapor
and solv ent u se w hen using spray
equipment. Failure to p rotect your
lungs can lead to respiratory illness
and nervous system damag e.
TOXIC FUM ES! Alw ays use an
approved spray booth or well ven-
tilated a rea wh en sp raying. NEVER
spray in an confined space where
toxic fu mes and flammable vapors
can accumulate to deadl y levels.