Clearing Jammed
Staples
A jammed staple must be cleared before using the stapler again.
To clear a jammed staple from the dis- charge area:
1.DISCONNECT STAPLER FROM THE AIR SUPPLY!
2.Unlock the catch lever and slide the magazine pusher all the way back.
3.Remove the staple stick from the mag- azine.
4.Flip the quick release latch as shown in Figure 6 and open the cover.
Cover |
Discharge |
Area |
Quick |
Release |
Latch |
Figure 6. Area to remove jammed staple.
5.The jammed staple should now be vis- ible; remove it from the discharge area with needle nose pliers.
6.Secure the quick release latch.
7.Inspect the staple stick. If it is bent or damaged, throw it away and insert a new stick that only contains clean, undamaged staples. DO NOT use dirty or damaged staples!
8.Slide the magazine forward until the catch lever engages.
H7678 18 Gauge Deep Stapler Kit |
