INTRODUCTION
Foreword
We are proud to offer the Grizzly Model H7678 18 Gauge Deep Stapler Kit. This model is part of a growing Grizzly family of fine pneumatic tools. When used accord- ing to the guidelines set forth in this man- ual, you can expect years of
The Model H7678 features a 360° exhaust port, comfort grip rubber handle, and eco- nomical air consumption with low noise.
The specifications, details, and photo- graphs in this manual represent the Model H7678 as supplied when the manual was prepared. However, owing to Grizzly’s pol- icy of continuous improvement, changes may be made at any time with no obliga- tion on the part of Grizzly.
Tool Data
Staple Size | 18 Gauge |
Staple Length | |
Staple Crown | 1⁄4" |
Magazine Capacity | 100 Staples |
Air Inlet | ¼" NPT |
Weight | 3.2 lbs. |
Operating Pressure |
Contact Info
If you have any comments regarding this manual, please write to us at the following address:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
Read the manual before operation. Become familiar with this stapler, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not under- stood or followed.
