Grizzly H7950 Introduction, Foreword Model H7951, Model H7949 Specifications, Contact Info

INTRODUCTION

Foreword	Model H7951
	Specifications

We are proud to offer the Grizzly Model H7949/H7950/H7951 Nailer. This nailer is part of a growing Grizzly family of fine pneumatic tools. When used according to the guidelines in this manual, you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s commit- ment to customer satisfaction.

The specifications and photographs in this manual represent Model H7949/H7950/ H7951 as supplied when this manual was prepared. However, owing to Grizzly’s pol- icy of continuous improvement, changes may be made at any time with no obliga- tion on the part of Grizzly.

Model H7949

Specifications

Nail Type	Flat Wire Welded Coil
Nail Length	11/2"–21/2"
Magazine Capacity	250–400 Nails
Weight	5.5 lbs.
Air Inlet	1/4" NPT.
Operating Pressure	70–110 PSI

Model H7950

Specifications

Nail Type	Flat Wire Welded Coil
Nail Length	11/2"–23/4"
Magazine Capacity	250–400 Nails
Weight	6.2 lbs.
Air Inlet	1/4" NPT.
Operating Pressure	70–110 PSI
-4-

Nail Type	Flat Wire Welded Coil
Nail Length	3/4"–13/4"
Magazine Capacity	250–400 Nails
Weight	5.5 lbs.
Air Inlet	1/4" NPT.
Operating Pressure	70–110 PSI

Contact Info

If you have any comments regarding this manual, please write to us at the following address:

Grizzly Industrial, Inc.

C/O Technical Documentation Manager

P.O. Box 2069

Bellingham, WA 98227-2069 Email: manuals@grizzly.com

Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: techsupport@grizzly.com

Web Site: http://www.grizzly.com

H7949/H7950/H7951 Nailer