Grizzly H8126 owner manual Inventory, Box Contents Figures 3 Qty, Hardware and Tools Not Shown Qty

Inventory

Inventory

After all the parts have been removed from the box, you should have the following items:

Box Contents: (Figures 3 & 4)		Qty
A.	Wide Wheel Grinder (Not Shown)	1
B.	Left Spark Guard	1
	Right Spark Guard (Not Shown)	1
C.	Eye Shields	2
D.	Nut Plates	2
E.	Bracket	2
F.	Left Tool Rest	1
	Right Tool Rest (Not Shown)	1
G.	Hardware and Tools (Not Shown):	Qty
	—Hex Bolts 1⁄4"-20 x 3⁄8" (Eye Shield)	2
	—Phillip Head Screws 8-32 x 3⁄8"
	(Eye Shield)	4
	—Flat Washers 4mm (Eye Shield)	4
	—Hex Nuts #8-32 (Eye Shield)	4
	—Flat Washers 1⁄4" (Eye shield)	2
	—Flat Washers 5⁄16" (Tool Rest)	4
	—Hex Bolts 5⁄16"-18 x 3⁄8" (Tool Rest)	4
	B
	C
	E

D

Figure 3. Left eye shield assembly.

F

Figure 4. Left tool rest.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

NOTICE

Some hardware/fasteners on the inventory list may arrive pre-installed. Check mount- ing locations before assuming that any items from the inventory list are missing.

-10- H8126 Wide Wheel Ginder