GE ZBD5600 ZPF25 Custom Door Panel Kit, Kit Contents, Cut 1/4” Thick Custom Panel to Size

ZPF25 Custom Door Panel Kit

1/4" Thick Custom Door Panel

ZPF25B, Black trim

ZPF25W, White trim

Tools and Materials required

•Phillips screwdriver

•Gloves to protect against sharp edges.

Note: It is best that 2 people perform this installation.

The ZPF25 trim kit provides support for 1/4” thick custom door panel.

Note: Maximum custom panel weight is 10 pounds.

WARNING

To prevent electrical shock, disconnect electrical power supply to dishwasher before changing panels. Do not operate dishwasher when door assembly is removed.

AVERTISSEMENT

Pour éviter les électrocutions, il faut débrancher l’alimentation

électrique du lave-vaisselle avant de changer les panneaux. Il ne faut pas faire fonctionner le lave-

vaisselle quand la porte est déposée.

Kit Contents

Step 1 Cut 1/4” Thick Custom Panel to Size

• Metal door
• 8 wood screws
• 6 “C” clips
• Door Trim
• 2 Door Springs	(8) Screws

Metal Door

Door Trim

“C” Clips

2 Door

Springs

• Cut door panel to the dimensions shown.

•The bottom left and right corners should be cut at 1/4” radius. See illustration.

Note: The trim will conceal the cut edges of the panels.		1/4" Thick	25-1/2"
	1/4"	Door Panel
	Radius
	Cut

23-1/8"

16