![Step 11](/images/new-backgrounds/67005/6700529x1.webp)
Installation
Stainless Steel Interior Dishwasher
Step 11
Install
Toekick
Assembly
•Install toekick slides to toekick support brackets. Use slide stamped “L” on left and “R” on right side.
•Align front and inner toekicks, matching screw holes.
•Align toekick to second screw hole in toekick slide as illustrated.
•Install color matched screws “E” through the front of the toekick and into the toekick slides. Do not tighten screws.
•Carefully, slide assembly back until it is aligned with adjacent cabinetry toekick.
•Adjust the height of the panel by loosening screws and sliding the front panel down, even with the floor.
•Carefully, hold the door and open fully. Ensure that door does not strike top of toekick.
•Adjust toekick height if necessary.
•Tighten screws.
Front Toekick Panel
Inner Toekick
Left Side
Toekick
Slide
Slide toekick out
Screw E | Attachment Screws |
Pull tab while Pushing toekick in
Step 12
Install
Side Trim
•Side trim filler strips are packed with this dishwasher. If the cabinet cutout is wider
than the dishwasher, install the filler strips on both sides of the dishwasher to cover gaps.
•Open the door fully.
•Place side trim against dishwasher tub and install 2 screws, loosely on each side.
•Adjust trim to correct width. Tighten screws.
Side
Trim
Screw B
15