Grizzly H8172 owner manual Inventory

Inventory

After all the parts have been removed from the carton, you should have:

Main Components (Figures 1 & 2)		Qty
A.	Lower Drum	1
B.	Motor Assembly	1
C.	Tipping Wheel	1
D.	Upper Drum	1
E.	Support Leg	1
F.	Frame	1
G.	Axle Bracket	1
H.	Mixing Blades	2
I.	Wheels	2
J.	Bearing Block	1
K.	Upper Bracket	1
L.	Gasket (not shown)	1

Hardware	Qty
Hairpin Cotter Pin (Wheels)	2
Hex Bolts M8-1.25 x 65 (Leg to Frame)	2
Flat Washers 8mm (Leg to Frame)	2
Lock Washers 8mm (Leg to Frame)	2
Hex Nuts M8-1.25 (Leg to Frame)	2
Hex Bolt M6-1 x 25 (Plunger Rods)	1
Lock Nut M6-1 (Plunger Rods)	1
Cotter Pin (Plunger Rod)	1
Hex Bolts M8-1.25 x 65 (Bracket to Frame)	2
Flat Washers 8mm (Bracket to Frame)	2
Lock Washers 8mm (Bracket to Frame)	2
Hex Nuts M8-1.25 (Bracket to Frame)	2
Hex Bolts M8-1.25 x 60 (Bearing Block)	1
Flat Washers 8mm (Bearing Block)	1
Lock Washers 8mm (Bearing Block)	1
Hex Nuts M8-1.25 (Bearing Block)	1
Hex Bolts M8-1.25 x 20 (Upper Bracket)	2
Flat Washers 8mm (Upper Bracket)	2
Lock Washers 8mm (Upper Bracket)	2
Hex Nuts M8-1.25 (Upper Bracket)	2
Phillips Screws M10-1.5 x 20 (Blade/Lower) ....	2
Plastic Washers 10mm (Blade/Lower)	2
Flat Washers 10mm (Blade/Lower)	2

A

B

C

D

Lock Washers 10mm (Blade/Lower)	2
Hex Nuts M10-1.5 (Blade/Lower)	2
Hex Bolts M8-1.25 x 20 (Drum Pieces)	10
Flat Washers 8mm (Drum Pieces)	10
Lock Washers 8mm (Drum Pieces)	10
Phillips Screws M10-1.5 x 20 (Blade/Upper) ....	2
Flat Washers 10mm (Blade/Upper)	2
Lock Washers 10mm (Blade/Upper)	2
Hex Nuts M10-1.5 (Blade/Upper)	2
Hex Bolt M8-1.25 x 65 (Motor Assembly)	1
Flat Washers 8mm (Motor Assembly)	3

Figure 1. Inventory components picture 1.

E

F

GH

I J K

Figure 2. Inventory components picture 2.

-8-

Lock Washers 8mm (Motor Assembly)	3
Hex Nuts M8-1.25 (Motor Assembly)	3
Hex Bolts M8-1.25 x 20 (Tipping Wheel)	2
Flat Washers 8mm (Tipping Wheel)	2
Lock Washers 8mm (Tipping Wheel)	2
Hex Nuts M8-1.25 (Tipping Wheel)	2

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

NOTICE

Some hardware/fasteners on the inventory list may arrive pre-installed. Check mount- ing locations before assuming that any items from the inventory list are missing.

H8172 Cement Mixer