MODEL H8241 |
120V ON/OFF |
PADDLE SWITCH |
INSTRUCTIONS |
Figure 1. H8241 ON/OFF Paddle Switch.
Introduction
The Model H8241 features a recessed ON
Specifications
Rated HP | 1⁄2 HP |
Rated Voltage | 120V |
Rated Current | 16A |
Padlock Shaft Size | 3⁄16" |
| Motor | ||
|
| KEDU | |
Hot |
| Neutral | |
Out |
| Out | |
| KJD17B | ||
|
| /120V | |
| 14 | 24 | |
Rear View | 13 | 23 | |
of Switch | |||
|
|
Hot | Neutral |
In | In |
Power Source
Figure 2. H8241 wiring diagram.
Switch Disabling Padlock
The switch can be disabled and locked by insert- ing a padlock through the ON/START button, as shown. Locking the switch in this manner can prevent unauthorized operation of the machine, which is especially important if the machine is not stored inside an
IMPORTANT: Locking the switch with a padlock only restricts its function. It is not a substitute for disconnecting power from the machine when adjusting or servicing.
Installation
When installing the H8241 switch, use the wiring diagram in Figure 2 to ensure proper wire con- nections.
Note: Only use insulated
Shaft
ON/START
Button
OFF/STOP
Paddle
Padlock
Figure 3. Switch disabled by a padlock.
If you need help with your new paddle switch, call our Tech Support at: (570)
Copyright © FEBRUARY, 2011 By Grizzly Industrial, Inc.
Warning: No portion of this INSTRUCTION SHEET may be reproduced in any shape Or form without the written approval of Grizzly Industrial, inc.
#TS13813 printed in CHINA