MODEL H8241 |
120V ON/OFF |
PADDLE SWITCH |
INSTRUCTIONS |
For questions or help with this product contact Tech Support at (570) |
To reduce risk of serious burns, electrocu- tion or death when installing this switch:
•Only use this switch to replace an existing machine switch that has the same physi- cal configuration and equivalent electrical specifications/ratings.
•Installation must only be performed by an electrician or qualified service personnel, and all applicable electrical codes must be adhered to.
•Turn off and completely disconnect all power sources to the machine before installing the switch.
•Do not use this switch in wet or damp locations, or near explosive fumes or flammable liquids. It is not sealed or rated for these environments.
•Make sure there is a verified machine ground on the circuit this switch is installed.
Figure 1. H8241 ON/OFF Paddle Switch.
Introduction
The Model H8241 features a recessed ON ( ) button that can be disabled with a padlock and a large OFF paddle used for fast shut off. The switch assembly will mount on a standard electri- cal box, or over a 1" x 2" opening.
Specifications
Rated HP | 1⁄2 HP |
Rated Voltage | 120V |
Rated Current | 16A |
Padlock Shaft Size | 3⁄16" |
Copyright © FEBRUARY, 2011 By Grizzly Industrial, Inc., REVISED APRIL, 2011 (TS)
Warning: No portion of this INSTRUCTION SHEET may be reproduced in any shape Or form without the written approval of Grizzly Industrial, inc.
#TS13813 printed in CHINA