Introduction
This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and maintenance procedures for a Powermatic Model 2700 Shaper. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or Walter Meier. Walter Meier can also be reached at our web site: www.waltermeier.com.
Specifications
Model Number | 2700 | |
Motor |
| Stock Number |
3HP, 230V, 60Hz, 1 Phase | 1280100C | |
5HP, 230V, 60Hz, 1 Phase | 1280101C | |
5HP, | ........................... 1280102C | |
Table Size (L x W) | 40" x 30" | |
Spindle Size (Standard) | 3/4", | |
Router Bit Collet Size (Optional) | 1/4", 1/2" | |
Spindle Capacity Under Nut: |
|
|
3/4” Spindle (provided) | ||
6” | ||
1” Spindle (optional accessory) | ||
1/2” Spindle (optional accessory) | ||
30mm Spindle (optional accessory) | ||
Spindle Travel | 4" | |
Spindle Speeds (RPM) | 7500, 10000, reversing | |
Table Opening Diameter | 7.33" | |
Insert Opening Diameters | 2.55", 4.16", 5.75" | |
Fence Size x 2 | ||
Dust Collection Minimum CFM Required 4" Port | 600 | |
Overall Dimensions | 40" (L) x 37" (W) x 45" (H) | |
Weight | 690 lbs (Shipping), 664 lbs (Net) | |
Note: For 460V operation, magnetic switch (Part No.
The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Walter Meier reserves the right to change specifications at any time and without prior notice, without incurring obligations.
Read and understand the entire contents of this manual before attempting assembly or operation! Failure to comply may cause serious injury
7
