Installation
When installing the H8241 switch, use the wiring diagram in Figure 2 to ensure proper wire con- nections.
This switch is intended to be connected to stranded wire with insulated
All crimps must be
Machine
Verified
Ground*
Hot | Neutral |
Out | Out |
KEDU | KJD17B /120V |
| Rear View |
14 | of Switch |
24 | |
13 | 23 |
Hot | Neutral |
In | In |
Power Source
Figure 2. H8241 wiring diagram.
*The machine MUST be connected to a verified ground. In the event of certain malfunctions or breakdowns, grounding reduces the risk of elec- tric shock by providing a path of least resistance for electric current.
Disabling & Locking Switch
The switch can be disabled and locked by insert- ing a padlock through the ON/START button, as shown. Locking the switch in this manner can prevent unauthorized operation of the machine, which is especially important if the machine is not stored inside an
IMPORTANT: Locking the switch with a padlock only restricts its function. It is not a substitute for disconnecting power from the machine when adjusting or servicing.
Shaft | Padlock |
|
ON/START 
Button
OFF/STOP 
Paddle
Figure 3. Switch disabled by a padlock.
Children or untrained people can be killed or seriously injured by this machine. This risk increases with unsupervised operation. To help prevent unsupervised operation, disable and lock the switch before leaving machine unattended! Place key in a well- hidden or secure location.
NOTICE
The padlock shaft diameter is important to the disabling function of the switch. With any padlock used to lock the switch, test the switch after installation to ensure that it is properly disabled.
Figure 4. Minimum lock shaft requirements.
H8241 120V ON/OFF Paddle Switch |
