Safety Instructions for Crane Scales

1.READ THROUGH THE ENTIRE MANUAL BEFORE USING. This crane scale presents serious injury hazards to untrained users.

2.NEVER ALLOW UNQUALIFIED PERSONNEL TO SERVICE THIS SCALE. Servicing the scale incor- rectly may reduce the maximum holding capacity of the load cell or cause the scale to give incorrect readings, which may result in over- loading.

3.DO NOT LIFT MORE THAN THE MAXIMUM SUGGESTED CAPACITY. Be aware that the load weight, harnesses and load bear- ing equipment all contribute to the total load weight. Overloading may cause the load to fall.

4.NEVER LIFT HEAVY LOADS WHEN TIRED, OR UNDER THE INFLUENCE OF DRUGS OR ALCOHOL. Be mentally alert at all times when lifting or moving heavy loads.

5.ONLY ALLOW TRAINED AND PROPERLY SUPERVISED PER- SONNEL TO OPERATE SCALE. Make sure operation instructions are safe and clearly understood.

6.NEVER LEAVE A LOAD WHILE SUSPENDED. Lower the load to the ground and un-hook all loads and harnesses before leaving the crane scale unattended.

7.NEVER SUSPEND THE LOAD OVER OR NEAR A PERSON. Loads may fall at any given time due to overloading, improper load- ing procedures, or failure of a com- ponent.

8.ALWAYS DISCONNECT FROM POWER SOURCE BEFORE SERVICING. Make sure switch is in OFF position, charger is unplugged, and battery disconnected before servicing.

9.CHECK FOR DAMAGED PARTS BEFORE USING SCALE. Check for broken parts, loose bolts, cracked or worn components and any other conditions that may affect machine operation. Repair or replace damaged parts.

10.USE RECOMMENDED ACCES- SORIES. Refer to the instruction manual for recommended acces- sories. The use of improper acces- sories may increase risk of injury.

11.NEVER LET LOADS SWING. Unsteady loads may become unbal- anced and fall. Swinging motions cause wear on components and may cause them to break.

12.USE CORRECT HARNESSES. Never use oversized or multiple harnesses.

13.CHARGE ONLY USING THE SUPPLIED CHARGER AND BATTERY. Do not use with other batteries, chargers or scales.

14.DO NOT EXPOSE BATTERY OR CHARGER TO WET OR RAINY CONDITIONS. Moisture greatly increases the risk of a shock haz- ard.

15.DO NOT STORE BATTERY WITH CONDUCTIVE MATERIALS. Storing the battery in a box of screws or nails can cause shorting across the battery poles.

-2-

Model T10006 50 Kg Digital Crane Scale

Page 2 Page 4
Page 3
Image 3
Grizzly T10006 owner manual Safety Instructions for Crane Scales
Page 2 Page 4

T10006 specifications

The Grizzly T10006 is a powerful and versatile tool designed for woodworkers and DIY enthusiasts alike. This high-performance benchtop sander offers a range of features tailored for optimal performance and user convenience. With a robust motor and an intuitive design, the Grizzly T10006 makes sanding tasks efficient and precise.

One of the main features of the Grizzly T10006 is its 1-horsepower motor, which drives the sanding belt at a high speed. This powerful motor ensures that the sander can handle a variety of materials, from hardwoods to softwoods, while delivering a smooth finish. The belt speed is adjustable, allowing users to fine-tune their sanding process according to the specific requirements of the project.

The design of the Grizzly T10006 includes a sturdy cast iron base, which provides stability and reduces vibrations during operation. This is particularly important when working on intricate projects where precision is key. The table is also easily adjustable, allowing for both angle and height modifications, ensuring users can achieve the desired results for their specific applications.

Another notable feature is the 4-inch dust port, which effectively connects to a dust collection system. This helps to maintain a clean workspace by minimizing dust and debris while sanding. A built-in dust chute directs the dust away from the sander and toward the collection system, enhancing both the performance and longevity of the tool.

The Grizzly T10006 is also equipped with a convenient belt tracking system, which allows users to adjust the position of the sanding belt for optimal alignment. This prevents slippage and ensures that the belt operates efficiently over time. The easy-to-change sanding belts make switching between grit sizes a quick and hassle-free process.

In terms of safety, the Grizzly T10006 features a solidly built frame with safety switches to prevent accidental operation. The included push stick allows for safe handling of smaller workpieces, ensuring that users can focus on their projects without compromising their safety.

Overall, the Grizzly T10006 stands out with its blend of powerful performance, intuitive features, and robust construction. Whether sanding rough surfaces or finishing delicate details, this benchtop sander is designed to meet the demands of woodworking professionals and hobbyists alike. With its impressive capabilities and user-friendly design, the Grizzly T10006 is undoubtedly a valuable addition to any workshop.
Top Page Image Contents