Mounting and Loading Hardware
When attaching harware to the crane scale:
•DO NOT attach multiple chains or har- nesses directly to the scale. Only one point of contact should be used on the hook and shackle to lessen the chance of the load falling and to allow proper load alignment.
•DO NOT attach oversized items or har- nesses directly to the scale. Oversized loading hardware create multiple points of contact and will not fit properly with the crane scale hardware. Inaccurate readings, uneven, and dangerous loads may result.
Refer to Figures 2 & 3 for the dimensions of the Model T10007.
8 3⁄4"
4"
���� |
|
|
|
|
|
| ��� | ||
|
|
|
|
|
|
|
|
| �� |
���� |
|
|
| ���� | �� | ||||
|
|
|
|
|
|
|
|
|
|
Figure 2. Scale front view measurements.
13⁄16"
2 3⁄4"
3⁄4"
Figure 3. Scale side view measurements.
Like all tools there is potential danger when operating this tool. Accidents can be caused by lack of familiarity or failure to pay attention. If normal safety precautions are overlooked or ignored, serious personal injury may occur.
������
To maintain accuracy, the scale should remain hanging and not be allowed to rest on the ground for a significant amount of time.
Model T10007 300 Kg Digital Crane Scale |
