MODEL T10044 |
80 LB SEED/FERTILIZER |
SPREADER |
INSTRUCTION SHEET |
To reduce the risk of injury when using this equipment:
• Do not allow anyone to operate the |
spreader without proper training. |
• Do not allow children to use spreader. |
• Always wear proper protective gear when |
using the spreader. |
• If an object becomes lodged in the hop- |
per, do not attempt to remove it while the |
C
E
D
F
G
impeller is moving. |
• Keep all hardware tightened to be sure |
the spreader is in safe working order. |
Inventory (Figures 1, 2 & 3) |
| |
A. | Hopper Assembly (not shown) | 1 |
B. | Catch Tray (not shown) | 1 |
C. | Left Wheel Frame | 1 |
D. | Right Wheel Frame | 1 |
E. | Handle Assembly | 1 |
F. | Support Leg | 1 |
G. | Connecting Rod | 1 |
H. | Gear Box & Axle Assembly | 1 |
I. | Wheels | 2 |
J. | Impeller | 1 |
K. | Hairpin Cotter Pin | 1 |
L. | Lock Nut | 1 |
Figure 1. Inventory 1.
H
I
J
Figure 2. Inventory 2.
L | M |
K |
|
M. | Hex Bolt | 1 |
N. | Phillips Head Screw | 1 |
O. | Hex Bolts | 2 |
P. | Inner Axle Bushings | 2 |
Q. | Hex Bolts | 4 |
R. | Axle End Covers | 2 |
S. | Hex Bolts | 4 |
T. | Lock Nuts | 8 |
N
Q
T
O
R
U
P
S
U. Flat Washers 6mm | 4 |
Figure 3. Inventory 3.
COPYRIGHT © DECEMBER, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#JM10162 PRINTED IN CHINA
T10044 80 lb. Seed/Fertilizer Spreader |