11.Attach Front Piece (B) to Bottom Piece (A) and Side Pieces (D).
D |
| C |
| E |
|
|
| A |
|
| A |
| B | E |
|
| |
|
| D |
12.Place the panels on Guide Bars (F).
D | C |
| A |
13.Attach dust port over hole in Rear Piece (C).
D | C |
| A |
| E |
Operation
The downdraft sanding table helps reduce air- borne dust while sanding with a handheld electric sander.
The dust port is connected to a shop vacuum or dust collector, and a workpiece is placed on top the downdraft table and sanded with an electric handheld sander. As dust comes off the sander, it is sucked through the downdraft table holes and into the vacuum or dust
to reduce risk of eye inju- ry or lung damage from dust, always wear safety goggles and a respirator when operating machine!
Work Stops
The downdraft table kit includes four work stops.
The work stops can be placed inside the panel holes to act as a barrier, preventing unwanted workpiece movement when sanding.
Work Stops |
E |
Replacement Parts
Replacement rubber grommets and work stops can be purchased if they get lost or damaged.
PT10699001
PT10699002
Model T10699 (Mfg. Since 2/13)
