Grizzly T21543, T21544, T21546 specifications

Specifications

Overall Dimensions:

T21543 ....................14" W x 10

1⁄4" D x 10" H

T21544 .................14" W x 17

3⁄4" D x 78

1⁄4" H

T21546 .................16" W x 13

3⁄4" D x 12

1⁄4" H

Locking Devices ..........Electronic Keypad or Key

Power Requirement ....................4 "AA" Batteries

Inventory

Keys ...................................................................2

"AA" Batteries ....................................................4

Hex Wrench 4mm ..............................................1

Mounting Hardware ...................................Varies

Mounting

There are mounting holes provided through the

safe walls that are accessed from inside the safe.

Use the provided hardware or fasteners of your

choice to firmly anchor your safe to a solid and

stable surface. Models T21543 and T21545 are

designed to mount on a wall or shelf, and the door

must open horizontally to operate correctly. Model

T21544 is a floor safe and the door must open

vertically for proper operation.

MODEL T21543/

T21544/T21545

ELECTRONIC KEYPAD SAFE

INSTRUCTIONS

WARNINg: NO PORTION OF ThIS MANUAL MAY bE REPRODUCE D IN ANY ShAPE

OR FORM WIThOUT ThE WRITTEN APPROvAL OF gRIzz LY INDUSTRIAL, INC.

#Ts12358 PRinTED in CHinA

If you need help with your new safe, call our Tech

Support at: (570) 546-9663.

NOTICE

NEvER keep the safe keys inside the safe.

We recommend that you keep each key in

a separate secure and accessible location.

In the event that both your personal and

emergency codes have been forgotten or

misplaced, these physical keys will be the

only way to unlock your safe.

Safe Keys

The safe keys can be used to unlock the safe door

instead of your personal code or the emergency

code.

if you have used the key to unlock the safe door,

you will have to use it to re-lock the door so that

you can remove the key from the door.

However, the key cannot be used to re-lock the

safe door if a code was used to open it.

Refer the next section for detailed instructions

regarding using the safe key.

Opening Safe Door the First Time

1. After you remove your new safe from the

shipping box, detach the two safe keys from

the outside of the safe.

2. Use a 4mm hex wrench to remove one of the

button head cap screws that secure the brass

nameplate, then let the nameplate swing

down to expose the keyhole (see Figure 1).

Figure 1. nameplate moved out of the way to

use the key (Model T21543 shown).

nameplate

Key

Hand indent