its service agent or a similarly qualified person in order to avoid a hazard.
Plug the cord into the mains.
Never plug the appliance in when not in use.
Never use the appliance when it is empty.
D: Never use the appliance with the protection lid (2) (depending on model) placed on the reflector (6).
If your appliance has an On/Off switch (according to model), switch it to the On position.
If your appliance has a thermostat (according to model), turn it to the Max position.
Leave to
On first use, the appliance may smell slightly and possibly give off smoke for the first few minutes – this is normal.
Never leave the appliance unattended when in use.
Do not use charcoal or any other combustible material in the appliance.
After use
If your appliance has an On/Off switch (according to model), switch it to the Off position.
If your appliance has a thermostat (according to model), turn it to the mini position.
Unplug the appliance and allow it to cool.
A/D: The grid (3), the reflector (6), the splatter guard (1) and the protection lid (2) (depending on model) can be cleaned with a sponge, hot water and washing up liquid.
Do not use a metal scourer or scouring powder.
To clean the grid (3), the sponge can be replaced by a brush.
A/D: The heating element (4) does not need cleaning.
If it is really dirty, rub with a dry cloth when cold.
Never immerse the appliance in water with its heating element and its cord.
Cooking
After
Set the thermostat to the position of your choice (depending on model).
Leave to cook depending on your taste.
Ensure that there is always water during the use of the appliance.
A/D: When water must be added during cooking, avoid pouring it over the heating element: pour the water between the bars (3a) of the grill plate (3).
Do not touch metallic parts while the appliance is on as they are very hot.
Do not cook food in tinfoil.
Never place aluminium foil or anything else between the grid and the food to be cooked.
Do not place cooking utensils to heat on the appliance.
Storage
A/D: Place the heating element (4) on the reflector (6) then insert the control panel (5) properly in its place.
A/D: Place the grid (3) on the appliance.
J: For the Sensano model, remove the control panel (5) from its place and pull it forward in order to replace the protection lid (2) correctly.
MADE IN FRANCE
Types 2182 - 2185 - 2285
ENG
37
