Groupe SEB USA - T-FAL 912471 manual Installing the transmitter, Installing the receiver

ENG

1 – INSTALLING THE BABYPHONE

The BABYPHONE by TEFAL is composed of 2 elements : a transmitter which receives and sends out sounds and which is to be placed near the baby, and a receiver which restores the message at a distance and which you must keep near you.

Installing the transmitter

•It must be connected to the power network at all times. The adapter (“transmitter” is marked on its label) connects

	under the
	base of the
1 2 3	device; its
	wire must
	b e f u l l y
	extended.

To ensure the relay in case of a power failure, or to occasionally use BABYPHONE where there is no electricity, 4 AAA LR03 1.5 volt alkaline batteries may be placed in the device . During normal operation, i.e. for 10 to 12 hours per day, the batteries have a service life of approximately 10 days.

Inserting the batteries :

-Disconnect from the power network before inserting the batteries.

-Open the back of the device by

p r e s s i n g t h e large button at the top.

- I n s e r t a screwdriver in the slit of the compartment to unclip the small cover.

-Turn the device over to remove the black box from its lodging

more easily.

- Position the

batteries in

t h e b o x ,

matching the + and – marks indicated (the negative end of the

battery is always placed on the spring side).

-Reposition the black box in its lodging.

-Clip on the cover.

- Reposition the back of the d e v i c e a n d p r e s s t h e 2 parts together until a “click” is heard.

•The transmitter must be installed at a certain height, in an upright position, at a distance of 1 metre m i n i m u m a n d 3 m e t r e s maximum from the child.

•Put into operation by pressing the 0/1 button.

Installing the receiver

Th e WAT C H BA B Y P H O N E model operates on alkaline batteries, which are not supplied. T h e D I G I T A L W A T C H BABYPHONE model operates on rechargeable batteries (already inserted in the device).

•Putting the WATCH BABY- PHONE model into operation

VisualLoudspeaker monitoring

On / off	Sound volume
button	adjustment

Inserting the batteries :

-Open the rear shell of the receiver by removing the two screws with a screwdriver.

-Po s i t i o n 3

A A A t y p e

LR03 batteries

in the box,

matching the + and – marks indicated on the battery box (the

negative end of the battery is always placed on the spring side).

-Close and screw the rear shell back down.

Warning : after the batteries have been inserted, your device turns on automatically.

•Putting the DIGITAL WATCH BABYPHONE model into operation

Digital Loudspeaker display

Visual monitoring

Vibrator button

On / off	Sound volume
button
	adjustment

Reception indicator

Selected channel n°

Sound level indicator

Vibrator Batteries

function indicator

When using for the first time, the device must be recharged for

12 hours :

-Connect the adapter (“receiver” is indicated on its label) on the left side of the

receiver.

- Connect to t h e p o w e r network.

When putting the device into operation, the battery indicator of the digital display indicates the battery charge level; when using for the first time, it is important that they be fully charged.

ENG