Groupe SEB USA - T-FAL FV9440, FV9430, FV9450 Spray Function, For more steam shot of steam button

•To select the appropriate ironing programme, activate the thermostat located under the handle - fig. 5.

-Rotation left : selects the programs requiring low temperature and steam levels.

-Rotation right : selects the programs requiring high temperature and steam levels.

-The program selected appears automatically on the indicator panel at the front of the iron - fig. 6.

-Set the steam control to STEAM - fig. 1.

-When your iron reaches the required temperature, the thermostat indicator goes out - fig. 7. You can start ironing.

3. Spray Function

-While ironing, press a few times in succession on the Spray button to dampen the fabric - fig. 8 and iron out awkward creases.

4. For more steam (shot of steam button)

-Press the Shot of Steam button from time to time - fig. 9.

-Wait a few seconds between each shot before pressing the button again.

5. Vertical steam ironing

-Ideal for removing creases from suits, jackets, skirts, hanging curtains etc

-Hang the garment on a hanger and hold the fabric slightly taut with one hand. The steam is very hot, so you should always do this with the garment on a hanger – never while someone is wearing it.

-Set your thermostat to MAX - fig. 10.

-Press the Shot of Steam button () repeatedly - fig. 9 moving the iron from top to bottom - fig. 11.

-Hold the iron a few centimetres from the fabric to avoid burning delicate fabrics.

6. Anti-Calc Plus System

-You iron is equipped with an integral anti-scale system - fig. 12.

-This system will help to provide :

•a better ironing quality with a constant flow of steam,

•a longer life for your iron.

7. Anti-drip function

-Autosteam Control, i.e. the automatic selection of the ironing programme depending on the fabrics elected, makes it possible to reduce steam flow at low temperatures and prevents your iron from dripping water onto your linen.

Recommendations: Fabrics and ironing temperatures:

•Your iron heats up quickly: so begin by ironing fabrics that are ironed at low temperatures first, then go on to those requiring a higher temperature,

•if you change to a program requiring lower temperatures, wait for the thermostat light to come on again before continuing to iron.

•when ironing fabrics with mixed fibres, set the ironing temperature for the most delicate fibre. For delicate fabrics we recommend testing the fabric first on an inconspicious place eg (inside them).

•For best results we recommend you use a vented ironing board to allow the powerful steam to penetrate through the fabric more efficiently.

•Ensure that the fabric you are ironing is flat to avoid steam venting sideways whilst ironing.

5