Groupe SEB USA - T-FAL PRO EXPRESS TURBO manual When the RED Light Water Tank Empty Comes on

Models: PRO EXPRESS TURBO PRO EXPRESS

1 9
Download 9 pages 6.02 Kb
Page 5
Image 5

SETTING THE TEMPERATURE CONTROL SLIDE AND STEAM OUTPUT CONTROL DIAL ACCORDING TO TYPE OF FABRIC TO BE IRONED :

Type of fabric

Linen

Cotton

● ● ●

Wool

Silk, Viscose

● ●

Synthetic,

Polyester,Acetate, Acrylic, Polyamide

Setting the temperature

Setting the steam output

control slide

control dial

linen lin

 

cotton coton

 

wool laine

 

silk soie

 

synthetic synth.

 

linen lin

 

cotton coton

 

wool laine

 

silk soie

 

synthetic synth.

 

linen lin

 

cotton coton

 

wool laine

 

silk soie

 

synthetic synth.

 

• Iron temperature control slide setting:

-Start with the fabrics to be ironed at a low temperature (•) and finish with those which need higher temperatures (••• or Max).

-Mixed fibre fabric: set the ironing temperature to the setting for the most delicate fabric.

-Woollen garments: press repeatedly on the steam control button to obtain short bursts of steam, without placing the iron on the garment itself.

• Steam output control dial setting:

-Thick fabric: increase the steam setting.

-At a low temperature : set the steam output control dial to the low position.

To prime the steam circuit, either before using the iron for the first time, or if you have not used the steam function for a few minutes, press the steam control button several times in a row, holding the iron away from your clothes. This will enable any cold water to be ejected from the steam circuit.

7- WHEN THE RED LIGHT “WATER TANK EMPTY” COMES ON

There is no more steam.The removable water tank is empty.

1.Grasp the handles of the removable tank and pull horizontally to remove it; fill with water.

2.Replace and push it firmly into place.

3.Press the “restart” button on the control panel to continue ironing (12).

12

8- VERTICAL STEAM IRONING

1.Set the iron temperature control slide and the steam output control dial (located on the control panel) to the MAX position.

2.Hang the garment on a coat hanger and hold the fabric slightly taut with one hand.

As steam is very hot, never attempt to remove creases from a garment while it is being worn, always hang garment on a coat hanger.

3.Holding the iron in a vertical position, tilted slightly forwards, press repeatedly on the steam control button (under the iron handle) moving the iron from top to bottom (13).

Recommendations : for fabrics other than linen or cotton, hold the iron a few centimetres from the garment to avoid burning the fabric.

13

Page 5
Image 5
Groupe SEB USA - T-FAL PRO EXPRESS TURBO manual When the RED Light Water Tank Empty Comes on, Vertical Steam Ironing