ENGLISH
54
speCiAl settinGs ----------------------------------------------------------------------------------------------------------
note:
7
If you wish to remedy other television
channels, repeat steps 4 to 8.
8 Press »m« to end the setting.
Changing stored analogue channels
If channels were stored with the automatic chan-
nel search while tuning t he television channels,
you can delete them. You can also store chan-
nels in a different preset, change or enter the
name of a channel as well as skip channels.
selecting a channel list
1 Open the menu with »m«.
2 Select the line »SOURCE SETUP« with »
C
«
or »
D
« and press »oK« to confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Program Table« with »
C
«
or »
D
« and press »oK« to confirm.
– The »PROGRAME TABLE« menu appears.
note:
7
Additional operations are explained in the
following sections.
Deleting channels
1
In the »
PROGRAME TABLE
« menu, select the
television channel to be deleted with
»
v
«,
»
D
«, »
B
« or »
A
« and press »●« (red) to
confirm.
2 Press »●« (yellow) to confirm the deletion
process.
note:
7
»●« (blue) allows all television channels to
be deleted.
3 Press »●« (green) to confirm the deletion
process.
tuning the television channels by
entering the channel numbers
1 Open the menu with »m«.
2 Select the line »SOURCE SETUP« with »
C
«
or »
D
« and press »oK« to confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line » Analogue Manual Tuning«
with »
C
« or »
D
« and press »oK« to con-
firm.
– The menu appears.
Program No
TSystem
Band
Channel
Fine Tuning
1
INSTALLATION
ANALOGUE MANUAL TUNING
BG
C
2
0
Auto Previous
Auto Next Store
48.25 MHz
4 Select the line »Program No« by pressing »
C
«
or »
D
« and use »
B
« or »
A
« to save the pre-
set.
5 Select »Band« by pressing »
C
« or »
D
« and
use »»
B
« or »
A
« to choose between »S«
(special channel) or »C« (normal channel).
6 Select the line »Channel« with »
C
« or »
D
«
and enter the channel number with »
B
« or
»
A
« step by step, or use »1…0 « to enter it
directly.
notes:
7
The current system is displayed in the
»System« line. If the colour or sound is
not functioning properly, select the line
»System« with »
C
« or »
D
«. Use »
B
« or
»
A
« to select the preferred setting.
7
If fine tuning is necessary, select the line
»Fine Tuning« with »
C
« or »
D
« and use
»
B
« or »
A
« to make the setting.
7 Press »●« (blue) to save the setting.