Grundig 750 owner manual Power Sources, Preventing Battery Leakage

Models: 750

1 72
Download 72 pages 30.39 Kb
Page 5
Image 5
POWER SOURCES

SATELLIT 750 OWNER’S MANUAL

POWER SOURCES

Power the SATELLIT 750 by installing 4 D alkaline, lithium or Ni-MH batteries or by plugging in the included 6 VDC AC adapter. The AC adapter plugs into the 6 Volt DC socket on the left side of the radio. A battery symbol appears in the lower right of the LCD, indicating battery or AC adapter power. If there’s a power failure with the AC adapter attached and batteries installed, the batteries will take over and supply power to the radio.

PREVENTING BATTERY LEAKAGE

To minimize the possibility of battery acid leakage, only use high quality alkaline, lithium or rechargeable nickel-metal-hydride bat- teries. Never intermix old with new, or different brands or types of batteries. Damage caused by battery acid leakage is not covered by this product’s warranty.

SETTING UP AM AND FM OUTSIDE OF NORTH AMERICA

To use the SATELLIT 750 in North America (U.S. or Canada), no changes to the initial factory settings are needed.

In North America, AM stations are spaced by 10 KHz. In Europe and other areas, they are spaced by 9 KHz. In North America, the FM band begins at 88 MHz. In other parts of the world, it may begin at

76 MHz or 87 MHz. Follow these steps to set this for your area:

To change these settings for your area turn the SATELLIT 750 off. Press the ENTER button and notice that -- appears in the upper right corner of the display. While -- appears, enter 09 or 10 with the numeric keypad and press ENTER. Repeat this procedure and press 88, 87 or 76 and press ENTER.

5

Page 5
Image 5
Grundig 750 owner manual Power Sources, Preventing Battery Leakage, Setting Up Am And Fm Outside Of North America