Grundig CDS2500IPW manual Troubleshooting

TROUBLESHOOTING

If a fault occurs, first check the points listed below before taking the set for repair. Do not open the set as there is a risk of electric shock.

If you are unable to remedy the problem by following these hints, call Grundig Helpline: 1800 509

394 Australia Grundig Helpline: 0800 450 259 New Zealand.

Warning: Under no circumstances should you try to repair the set yourself, as this will invalidate the warranty

Problem	Cause	Solution
No sound / power	Volume not adjusted	Adjust the Volume
	Power cord not securely	Connect the AC cord properly
	connected
Display does not function
properly / No reaction to	Electrostatic discharge	Switch off and unplug the set.
operation of any of the		Reconnect after a few seconds
controls
The CD skips tracks	CD damaged or dirty	Replace or clean CD
	Program is active	Quit program mode
	No CD inserted	Insert a CD, CD-R or CD-RW
No disc indication	CD badly scratched or dirty	Replace or clean CD
	Laser lens has steamed up	Wait until lens has cleared
	CD-R is blank or the disc is not	Use a finalized CD-R
	finalized
CD Playback does not work	CD badly scratched or dirty	Replace or clean CD
	Laser lens steamed up	Wait until lens has adjusted to
		room temperature
	USB / Memoy Card connecting	Unplug and reinsert memory
	error	card or USB stick
USB / Memory card failure	USB / Memory Card does not	Use a USB / Memory Card c
	contain playable files	ontaining MP3 or WMA files

16