The settings menu | 09 |
DON’T FORGET! You can use the skip forwards and backwards function when watching a recording by pressing the [t] or [u] buttons.
Auto Disk Management - This will allow the oldest recordings that have been viewed to be over written if the Digital TV Recorder is short of space.
DON’T FORGET! If you don’t want a programme to be overwritten you can protect it.
Show Available Space As - This sets how you want remaining space to be shown in the menus. You can choose from the percentage of space, hours of standard definition, or hours of high definition available.
Format Hard Disk Drive - This will reformat your hard disk drive.
DON’T FORGET! This will permanently delete all of your recorded programmes, even if they are protected.
Other
|
| Settings |
| Weds 8 Oct 8:22pm |
Display & Audio | Language | Parental | Freesat + | Other |
Genre Page
Show Non Freesat Channels
Auto Standby
Power Save in Standby Mode
Upgrade Software
Add Non Freesat Channels
First Time Installation
R | OK Select | EXIT Exit Menu |
Genre Page - This setting allows you to turn on or off the genre selection page. When you press [GUIDE] when the genre page is turned off, the programme guide will be shown straight away. The default setting is that the genre page is shown.
Show Non Freesat Channels - This setting allows you to see the manually added free to air channels in the channel list.
DON’T FORGET! The default setting is not to show manually added free to air channels. Free to Air channels are not added to the programme guide.
Auto Standby - This will put the Digital TV Recorder into standby if there has been no user activity for four hours. A thirty second countdown is shown on screen, to give the user the option to cancel the Digital TV Recorder going into standby.
Power Save in Standby Mode - This setting reduces the amount of energy used when in standby mode.
Upgrade software - This setting allows the HD Digital TV Recorder to search for new software.
Add Non Freesat Channels - See page 23 for further instructions.
First Time Installation - This setting allows you to perform a first time installation. Follow the instructions
DON’T FORGET! A first time installation will remove all non freesat channels, and default your Parental PIN to 0000.
20