Grundig Elegance 40 LXW 102-8616 Dolby manual Picture settings, Audio settings, Volume, Balance

SETTINGS ______________________________________________

Picture settings

Picture

Brightness 39

Contrast

Colour

Sharpness

Hue

Noise reduction		Sharp
Picture smart		User
To Page 2
	Select	Back
OK	and edit	Exit
●

1Press »i« to open the »MAIN MENU«.

–The »MAIN MENU« appears.

2Select »Picture« with »P+« or »P-« and confirm with »OK«.

–The »Picture« menu appears.

3Select »Default settings« with »P+« or »P-« and the setting »User« with »￿« or »￿«.

4Select »Brightness«, »Contrast«, »Colour«, »Sharpness« or »Noise reduction« with »P+« or »P-« and press »OK« to con- firm.

Note:

The setting »Hue« only applies to NTSC programmes (e.g. for playback of American television programmes on the video recorder).

5Press »￿« or »￿« to select the level, and then press »OK« to confirm.

6Press »i« to finish the settings.

Audio settings

Sound

Volume	0
Balance
Sound type	Stereo
Effect	Normal
AVL	On
Equalizer
Select	Back
and edit	Exit

1Press »i« to open the »MAIN MENU«.

–The »MAIN MENU« appears.

2Select »Sound« with »P+« or »P-« and confirm with »OK«.

–The »Sound« menu appears.

Volume

1Select »Volume« with »P+« or »P-« and adjust the setting with »￿« or »￿«.

Balance

1Select »Balance« with »P+« or »P-« and adjust the setting with »￿« or »￿«.

Stereo / two channel, mono

If the device receives two channel programmes, e.g. a film with the original sound on sound channel B (display: »Dual B «) and the dubbed version on sound channel A (display: »Dual A«), you can select the sound channel you desire.

If the device receives stereo or Nicam programmes, it switches automatically to stereo sound (display: »Stereo«).

You can switch the sound to »Mono« if the stereo reception quality is poor.

1Select »Sound type« with »P+« or »P-« and adjust the setting with »￿« or »￿«.

ENGLISH

13