CLOCK ALARM
HOME/DUAL time display Priority
Your G-2000A allows you to set two different times: HOME
and DUAL. Normally, the HOME time has priority. You can
also set the DUAL time to be displayed constantly.
• The [MODE] button toggles the display between HOME,
DUAL and ALARM time indication. After 5 seconds, the
display will return to the previous indication.
• Press [MODE] once. The DUAL time appears and the
DUAL indication starts flashing.
• Press [MEMO/TIME SET] to display the dual time
constantly.
- DUAL stops flashing.
• To display the home time constantly again, press
[MODE] twice and then [MEMO/TIME SET] while HOME
is flashing.
Setting the current time (HOME or DUAL)
• Press [MODE] to set the display in HOME or DUAL time
mode.
• Press [MEMO/TIME SET].
- The time digits start flashing.
• Use the [H] button to set the hours and the [M] button to
set the minutes.
- A single press of the [H] or [M] button advances the
setting by 1 hour or 1 minute respectively. If the button is
held pressed, the setting advances rapidly.
- The minutes will not be carried over to the hours if, for
example, the minutes indication changes from ‘59’ to
’00’.
• Press [MEMO/TIME SET] to store the setting - If you do
not press [MEMO/TIME SET], the display will return to
the previous time setting after 5 seconds.
Alarm function
You can use your world receiver as an alarm clock. To use
this function you first have to set the alarm time. You will be
woken with a bleep, or by the radio.
Setting the alarm time
• Press [MODE] repeatedly until ALARM starts flashing
on the display.
• Press [MEMO/TIME SET].
- The time digits start flashing.
• Use the [H] button to set the hours and the [M] button
to set the minutes (in the same way as the clock time).
• Press [MEMO/TIME SET] to store the setting
- If you do not press [MEMO/TIME] SET, the display will
return to the previous time setting after 5 seconds.
Selecting the alarm mode
• Use the [RADIO/BUZZ] switch to select the alarm
mode. Switching the alarm on
• Press [ALARM].
- ‘ALARM’ and the symbol for the
selected alarm mode will appear
on the display:
Switching the alarm off
• Press [ALARM].
- The alarm signs will disappear.
• When the alarm sounds, you can also switch the
alarm off by pressing the [POWER] button.