![](/images/new-backgrounds/1133050/13305057x1.webp)
RETROFITTING A DIGITAL RECEIVER
Operating the receiver with the television remote control
Note:
The receiver must be connected and installed to the G bus on the television set via the communication line.
Switches the television off (standby). | |
1…0 | Switches the television on from standby mode. |
| Selects channels directly. |
? | Displays information on the selected function. |
| You receive the station information of the digital |
| receiver after changing station or by looking in the |
| electronic TV guide. |
E | Opens the »Format« menu. |
| Then use P+ or P- to make the selection. |
PIP | Displays an inset picture. |
| Returns to normal picture. |
AV | Opens the |
| Then select with P+ or |
dSound on/off (mute).
i | Opens the television »EASY DIALOG« menu |
| (main menu). |
| You can find the main menu of the digital receiver in |
| the »EASY DIALOG« menu. |
ZSwitches back one menu level in the receiver.
P+, P- Switch the television on from standby;
Select stations step by step;
Move the cursor in the menus up and down.
Adjust the volume;
Move the cursor left/right.
OK | Opens the station or favourites list on the receiver; |
| activates various functions. |
TXT | Switches between teletext mode and TV mode on the |
| television (only the television teletext can be used). |
Opens and closes the electronic TV guide on the | |
| receiver. |
ENGLISH
29