SEARCHING F
wPM TEXT f MEMORY
RDS FEATURE
e 1
wf
FANTASY
w
94.55
FM
wf MEMORY
100.60
FM
wf MEMORY
100.60 4
FM
wf
ANTENNE
SETTINGS ______________________________________________
Setting and storing radio stations ...
... with the automatic station search
When the device is first connected to the mains or the batteries are first inserted, the device begins an automatic FM station search and stores the first ten stations with strong signals on the preset buttons 1/6, 2/7, 3/8, 4/9, 5/10. In this process, preference is given to RDS stations. The follow- ing appears in the display: »SEARCHING FM PLEASE WAIT«. You can stop the search by pressing »MEMO.«.
After the search is completed, a demo program with the various RDS func- tions starts in the display. This program can be interrupted by pressing any key. The demo program can be
However, you can also tune stations manually and store them on the preset buttons.
... manual
1Press »ON/OFF« to switch on the device.
–You will hear the radio station last selected.
2Press »•FM •MW •LW •SW« (right side of device) to select the wave band.
3Keep pressing »TUNING DOWN « or »TUNING UP « until you reach the frequency you want.
–Display: the frequency changes in 50 kHz steps (FM), 9 kHz steps (MW) 1 kHz steps (LW) or 5 kHz steps (SW);
or
Press »TUNING DOWN « or »TUNING UP « for approximately one second.
–Display: the automatic search stops at the next station with a strong signal.
4Press »MEM0.« to activate the memory function.
– Display: »MEMORY« flashes.
Note:
If you do not press any button within 8 seconds, the device will quit memory mode without making any changes.
5Press the desired preset button »1/6, 2/7, 3/8, 4/9, 5/10« once (preset stations 1 to 5) or twice (preset stations
–Display: e.g. »4«, »MEMORY« flashes.
6Press »MEMO.« again to store the station.
–Display: the frequency, »4« and »MEMORY«, then the station name.
22
