ENGLISH

27

ENGLISH

Radio text

Some RDS stations provide radio text as additional information. The radio
text appears as ticker text in the display.
1To call up radio text, briefly press »TEXT«.
– The information appears after a short time.
2For a fast run-through of the radio text, press and hold down »TEXT«.
Note:
If no radio text is provided by the current station, »NO TEXT« appears in
the display.
3Press »TEXT« briefly to quit radio text.

Alarm mode

Alarm with signal tone

1Press »ON/OFF« to switch off the device.
2To set the alarm signal to signal tone (»e«), press »ON ALARM
OFF« until »e« appears in the display.
– After a short time, the display changes to the current time.
3Briefly press »ON ALARM OFF« to check the alarm time.
– Display: the set alarm time and »e«.
– After a short time, the display changes to the current time.
– The alarm goes on with a signal tone at the set time.

Alarm with radio station

1Press »ON/OFF« to switch on the device.
2Press »• FM •MW •LW •SW« (right side of device) to select the
frequency band.
3Select the desired station using the station buttons »1/6,2/7,3/8,
4/9,5/10« (press once: presets 1 to 5), twice: (presets 6 to 10).
4Adjust the alarm volume using »– VOLUME +« (on the right of the
device).
5Press »ON/OFF« to switch off the device.
6Select the radio alarm (»ɷ«) by pressing »ON ALARM OFF« until
»ɷ« appears in the display.
– After a short time, the display changes to the current time.
OPERATION__________________________________________
wTEXTf
RADIO TEXT E
wTEXTf
NOTEXT
e
9:46 TU
ɷ
21:55 WE
e
6:00 AL