1 Safety regulations
Important
•Assembly, installation and servicing must be carried out by an authorised electrician.
•Switch off operating voltage before the start of assembly or service work or pull out the mains plug.
•Install the system …
-in a
-so that it is protected from moisture, vapours, splashing water and damp
-somewhere protected from direct sunlight
-away from the immediate vicinity of heat sources
-at an ambient temperature of < 50 °C.
•Make sure the device is adequately ventilated. Do not cover the ventilation slots.
•Beware of short circuits!
•No liability is accepted for damage caused by faulty connection or inexpert handling.
•Observe the relevant norms, regulations and guidelines on the installation and operation of antenna systems.
•Earth the SAT receiver using the equipotential bonding rail in accordance with DIN EN 50083 and VDE 0855.
•Do not perform installation and service work during thunderstorms.
Take action to prevent static discharge when working on the device.
2 General information
2.1Packing contents
1Cassette PHDQ 2002 BC or PHDQ 3002 BC or PHDQ 4002 BC or PHDQ 5002 BC
2HF connection cables
1 Assembly instructions (on CD)
1 Measuring log
- 3 -