Press the button.

—> The menu “Setting the LNB oscillator frequency”

– “LNB-Freq.:” is activated (page 18).

or

•Press the button.

—> The sub menu “Modulator settings”

–“OUTPUT: Modulator” is activated.

Modulator settings (only Bx…A)

* )

Bx 1A

OUTPUT:

 

 

 

 

 

 

Modulator:

on

on / off

 

 

 

 

 

 

 

•By pressing the buttons, switch the modulator (HF output) “on” (default setting).

•Press the button.

—> The display shows “OUTPUT: LEVEL HF OUT:”.

Setting output level of the channel strips (only Bx…A)

* )

 

Bx 1A

 

OUTPUT:

 

 

 

 

 

 

 

LEVEL

HF OUT: 0

0 … -7

* )

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bx 1A

 

OUTPUT:

 

 

 

 

 

 

 

LEVEL CONTROL

 

 

 

 

 

 

 

 

 

 

 

 

 

•Press the button.

—> “OUTPUT: LEVEL CONTROL” appears in the display.

Note:

In this mode a digital carrier is set to the analogue pic- ture carrier frequency of the output channel of the channel

- 16 -