Setting the stuffing (only Bx…A)

* )

 

 

 

 

 

 

 

 

 

Bx 1A

STUFFING:

 

 

/

 

 

 

 

◀

▶

 

 

 

 

 

 

 

 

 

 

/

 

 

 

 

SR=6900 (6531)

 

+

–

 

 

 

 

 

 

 

 

 

 

Kanalzug A

 

 

 

 

 

 

M

 

 

 

 

 

 

 

 

Channel strip A

 

 

 

 

 

 

 

 

 

SR=6900 (= “number 1”):

Active output symbol rate

Bx 1A STUFFING:

SR=6900 (6531)

Zahl 1

Zahl 2

Number 1

Number 2

(6531) (= “number 2”):

The current measured output symbol rate.

If the station filter is activated, this value is lower than the value of the “number 1”. The value fluctuates, since the data rates of individual stations are dynamically modified by the broadcasters.

•Use the ◀ / ▶ buttons to place the cursor under the number to be changed (“number 1”) and set the symbol

rate with the buttons .

The value set corresponds to the new output symbol rate.

Note:

• Increase the value of “number 1”

—> With the station filter “on”/”off”, the “number 1” can be increased to any value up to 7,000.

• Reduce the value of “number 1”.

—> With the station filter “on”, the “number 1” can be decreased. To do this, observe the “number 2” for approx. 30 seconds and note the highest value. Add roughly 10 % to this value. Do not decrease the “number 1” lower than the value of “number 2”.

- 22 -