•By pressing set the spectral position “normal” or “inverse”.

•Press the button.

—> The menu “QAM monitoring” – “MODE: Ueberwachung” is activated.

QAM monitoring (only Bx…A)

In this menu the signal at the Cassettes´ output is defined if there is no input signal available:

–“Ueberwachung” (Monitoring): Single carrier,

–“KDG”: QAM modulated data flow.

Thus an automatic monitoring of the QAM modulated output signal is possible.

* )

Bx 1A

MODE:

 

 

 

 

 

Ueberwachung

Überwachung /

 

 

 

Monitoring

•Use to select “Ueberwachung” or “KDG”.

•Press the button:

—> The menu “Setting the LNB oscillator frequency” – “LNB-Freq.:” is activated.

Setting the LNB oscillator frequency

 

Bx 1A

LNB-Freq.:

 

 

/

 

 

▶

 

 

◀

 

f = 10600 MHz

 

 

 

 

 

 

 

 

 

 

 

•Use the ◀ / ▶ buttons to place the cursor under the number

to be changed and use to set the LNB oscillator frequency.

•Press the button:

—> The menu “Setting the input symbol rate and the DVB mode” – “INPUT SR=27500” is activated.

- 18 -