12
Basic functions
Switching on and off
1Switch on the television by pressing the »Ȃ« button on the tele-
vision set.
– The device switches to standby mode.
Switch the television on with »1…0« or »P+« or »P-«.
2Press the »Ǽ« button to switch the television to standby mode.
Press »1…0« or »P+« or »P-« to switch on the device from
standby mode.
– After switching on, the station preset of the TV Guide provider
is automatically selected. After a short time, the information
about the current and upcoming broadcast is displayed.
3Completely switch the television off by pressing »Ȃ« on the
television set.
– This saves electricity.
Selecting channels
1Use »1…0« to select channels directly.
Preselect two digit channel positions with »–/–– «.
2Press »P+« or »P-« to move up and down channels.
Selecting AV channel positions
1Use »AV« to select AV channels directly.
Adjusting the volume
1Adjust the volume with »Ǹ« or »Ƿ«.
Muting
1Use »p« to switch the sound off (mute) and to switch it on
again.
Call up TV Guide and time.
After switching the station presets, information about the current
broadcast is displayed (TV Guide).
1Call up information about the current and next broadcast by
pressing »Ȅ«.
- The information and the time are briefly displayed.
Note:
If the message »No info« is displayed, switch to the channel
preset of the TV Guide provider by pressing »1…0« or »P+«
or »P-«. After a few minutes the new data will have been loa-
ded.
Displaying information
1Press »POS« to display the information.
– The display disappears automatically after a short while.
TELEVISION OPERATION ___________________
Tele Pilot 160 C
VCR DVD
SAT
z
TXT
PIP
AV
POS
SIZEPAP
SCAN
d