OPERATION_____________________________

Before first use

7Remove the transparent protection sleeve on the On/Off switch D panel before using the appliance for the first time.

Cleaning sensitive and small objects

1 Open translucent lid A and fill the stainless steel tank B with water.

Caution

7Do not exceed the “MAX” marking.

7Do not operate the appliance without filling with water, otherwise it will get damaged.

7Use only clear, cold water.

2 Put the object in the plastic cleaning basket G .

3 Place the plastic cleaning basket G into the stainless steel tank B .

4 Close the translucent lid A.

5 Plug the power cord C into a suitable power outlet.

Power on indicator light E illuminates for a few seconds and disappears.

6 Press the On/Off switch D .

The power on indicator light E illuminates and the cleaning operation starts. It takes 5 minutes for the appliance to finish cleaning operation.

7 When the cleaning operation finishes, the appliance automatically stops and the power on indicator light E disappears.

8 After using the appliance, disconnect the power cord C from the power outlet.

9 Open the translucent lid A and take out the plastic cleaning basket G with the object. Pour out the water and clean the appliance. See the “Cleaning and care” section.

Notes

7You can put multiple of jewelries at the same time.

7Put the glasses in the plastic cleaning basket G always with the glasses in upward position.

ENGLISH 23­

Page 9
Image 9
Grundig UC5020 Operation, Before first use, Use only clear, cold water, You can put multiple of jewelries at the same time