PREPARATION ____________________________________________
Check if the mains voltage on the type plate (on the bottom of the appliance) corresponds to your local mains supply.
Assembly
Your appliance is supplied with a fitted dust bag. Once you have assembled the individual parts, the appliance is ready to operate.
1Insert the flexible hose with the flexible con- tact N into the suction intake I on the appliance until it latches in.
Notes
7To remove the flexible hose O , press the catch on the side of the flexible contact and pull it out.
7When operating, the flexible contact N allows the flexible hose to swivel by 360°. This facilitates cleaning considerably.
2 Insert the other end (handle) of the flexible hose into the extendable suction tube R .
3Insert the required brush or attachment into the lower end of the extendable suction tube
R.
4Press and turn all the connectors to plug them in and release again by pulling and turning.
Note
7Never operate the appliance without the dust bag. The cover of the dust housing will not close without the dust bag being in place.