Manuals / GSW / Household Appliance / Water Heater

GSW 73992 warranty Filling the Water Heater, Startup, High Temperature Limiting Device

Models: 73992

1 24
Download 24 pages 53.57 Kb
Page 18
Image 18

VI)OPERATION General

CAUTION! NEVER APPLY ELECTRICAL POWER TO THIS WATER HEATER UNLESS IT IS COMPLETELY FULL OF WATER. TO PREVENT DAMAGE TO THE TANK AND HEATING ELEMENTS, THE TANK MUST BE FILLED WITH WATER BEFORE USE. WATER MUST FLOW FROM THE HOT WATER FAUCET BEFORE APPLYING POWER.

Filling the Water Heater

1.Do not turn the power on until all the following steps, including Startup steps, have been completed.

2.Make sure the drain valve is closed.

3.Open a hot water faucet associated with the system.

4.Open the cold water supply valve.

NOTE: When filling, avoid water leakage. Do not allow the insulation of the water heater to get wet as water can cause electrical malfunction.

5.When water runs out of the hot water faucet in a steady stream, the tank is full.

6.Close the hot water faucet and check the system for leaks. Repair as required and retest.

7.Connect a hose to the drain valve and route to a suitable drain. Open the drain valve and let water run to flush out any foreign matter that may have entered the system. Once flushed, close the drain valve and disconnect hose. Repeat steps 4-6.

Startup

Perform the following checks when the heater is placed into operation for the first time.

Voltage Check: Verify that the supply voltage and the rating plate voltage are the same.

1.Open the upper component panel cover and check all electrical connections.

2.Remove the lower cover and the insulation for the ele- ment compartment and check all electrical connections.

3.Turn "ON" the electrical supply to the heater.

4.Carefully watch all the components for one complete cycle of operation to see that they function properly.

DANGER: Hazardous voltages are present in both com- partments. Be careful not to touch any electrical connec- tions.

5.To check the operation of the thermostat

(a)operate the thermostat manually and

(b)let the heater come to the preset temperature and shut off automatically.

6.Turn "OFF" the electrical supply to the heater.

7.Replace all the insulation and close all covers.

8.Turn "ON" the electrical supply to the heater.

High Temperature Limiting Device

The heater is equipped with a high temperature cutoff switch. If the water temperature exceeds the preset limit this device turns off the power to the heating elements. The high temperature switch is set to activate at 88°C (190°F). If the switch has been activated, allow the water temperature to drop by 17°C (30°F) (min) and reset manually. The high- temperature switch is not adjustable.

- 18 -

Page 17 Page 19
Page 18
Image 18
GSW 73992 warranty Filling the Water Heater, Startup, High Temperature Limiting Device
Page 17 Page 19

73992 specifications

GSW 73992, an innovative model in the world of advanced non-metallic materials, has garnered attention for its exceptional performance and unique characteristics. Engineered to meet the demanding needs of various industries such as aerospace, automotive, and construction, GSW 73992 stands out due to its remarkable properties and cutting-edge technologies.

One of the main features of GSW 73992 is its lightweight nature. Weighing significantly less than traditional metal counterparts, this material enables designers and engineers to reduce overall weight without compromising structural integrity. This attribute is particularly advantageous in the aerospace sector, where weight savings translate into improved fuel efficiency and enhanced performance.

The technology behind GSW 73992 is grounded in advanced composite engineering. Utilizing a combination of high-strength fibers and resins, GSW 73992 exhibits exceptional tensile strength and impact resistance. Its ability to withstand harsh environmental conditions, including extreme temperatures and moisture, makes it a preferred choice for applications requiring durability and reliability.

Another standout characteristic of GSW 73992 is its corrosion resistance. Unlike metals, which can succumb to rust and degradation over time, GSW 73992 maintains its integrity even in challenging environments. This property not only contributes to the longevity of products made from GSW 73992 but also reduces maintenance costs, making it an economical option for manufacturers.

GSW 73992 also boasts excellent thermal insulation properties. Its low thermal conductivity ensures minimal heat transfer, making it ideal for applications in building materials and automotive components where temperature regulation is crucial. This feature enhances energy efficiency and contributes to sustainability efforts by reducing the need for additional insulation materials.

Additionally, GSW 73992 offers design flexibility, allowing manufacturers to create complex shapes and forms that would be difficult to achieve with traditional metals. This adaptability opens up new possibilities in product design, enabling creative solutions that can cater to specific industry needs.

Overall, GSW 73992 represents a significant advancement in material science, combining lightweight construction, high strength, resistance to environmental stressors, and design versatility. Its array of features positions it as a game-changer for industries seeking to improve performance while adhering to modern sustainability standards. As the demand for innovative materials continues to grow, GSW 73992 is poised to play a pivotal role in shaping the future of engineering and manufacturing.