For Installations in the United States:

“Standard for the Installation of Oil-Burning Equipment (NFPA 31)” and

“National Electrical Code (NFPA 70)” available from: American National Standards Institute,

25 West 43rd Street,

New York, NY 10036

Check your phone listings for the local authorities having jurisdiction over your installation.

Important: Installation and service of an oil fired water heater and burner must be performed by a qualified Oil- Burner Technician to comply with local and provincial or state codes applicable to this type of equipment. All supply equipment, installation, approvals, permits, inspections, etc. are the responsibility of the owner of this water heater. Consult your local authorities for regulations specific to your area.

Safety Warning (Flammable Vapours)

WARNING

FLAMMABLES

Flammable Vapours

FIRE AND EXPLOSION HAZARD

Can result in serious injury or death

Do not store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other appliance. Storage of or use of gasoline or other flammable vapours or liquids in the vicinity of this or any other appliance can result in serious injury or death.

There is a risk of property damage, personal injury or death from the by-products of combustion (e.g., flue gases), in using fuel-burning appliances such as water heaters. Areas that may not be suitable for water heater installation include those where flammable liquids, gasoline, solvents, adhe- sives etc. are stored, or where engine-driven equipment or vehicles are stored, operated or repaired. These, and simi- lar products, should not be stored or used near the water heater or air intake. Due to the nature of air movement, flam- mable vapours can be carried some distance from the point of storage. A water heater igniter or burner flame can ignite these vapours causing a flashback, fire or explosion, which may result in severe property damage, serious personal injury or death. If flammable liquids or vapours have spilled or leaked in the area of the water heater, leave the area immediately and call the fire department from a neighbor’s home. Do not attempt to clean the spill until all ignition sources have been extinguished.

Safety Warning (Scalding)

DANGER

Hot water produced by this appliance can cause severe burns due to scalding. The hazard is increased for young children, the aged or the disabled when water temperatures exceed 52°C (125°F). Use tempering valves, also known as mixing valves, in the hot water system to reduce the risk of scalding at point-of-use such as lavatories, sinks and bathing facilities. Such precautions must be followed when this heater is operated in combination with dishwashing or space heating applications.

Safety Warning (Carbon Monoxide)

DANGER

Carbon Monoxide Warning

Follow all vent system requirements by the local authorities having jurisdiction over your installation.

Failure to do so can result in death, explo- sion or carbon monoxide poisoning.

As with all fuel burning equipment, this heater requires an adequate supply of air for combustion and ventilation. An insufficient air supply can result in poor combustion or the re-circulation of the flue gases. Such a condition can cause soot build-up and present a fire hazard. Flow reversal of flue gases can cause an increase of carbon monoxide inside of the dwelling that could result in serious bodily harm or death from asphyxiation.

MAKE SURE THE FLOW OF COMBUSTION AND VENTI- LATION AIR IS NOT RESTRICTED.

Relief Valve Requirements (T&P)

All water heaters must be fitted with a proper temperature and pressure relief valve. These valves must be certified as meeting the requirements of the “Standard For Relief

Valves For Hot Water Supply Systems, ANSI Z21.22/CSA 4.4”.

If this water heater has been exposed to flooding, freezing, fire or any unusual condition, do not put it into operation until it has been inspected and approved by a qualified service technician.

– 4 –

Page 4
Image 4
GSW JWF507, JWF657 manual For Installations in the United States, Safety Warning Flammable Vapours, Safety Warning Scalding

JWF657, JWF507 specifications

The GSW JWF657 and JWF507 are two prominent models in the GSW lineup, known for their innovative features, advanced technologies, and robust characteristics. These models have been designed to cater to a wide range of applications, making them popular choices among users looking for efficient performance and reliability.

Starting with the JWF657, this model boasts a high-capacity design, making it suitable for both residential and commercial use. One of its standout features is the energy-efficient motor that not only reduces power consumption but also enhances performance. The JWF657 includes a user-friendly control panel that allows for easy adjustments and settings, ensuring that users can operate the machine with minimal effort.

In terms of technology, the JWF657 integrates smart sensors that monitor operational parameters in real-time. This feature ensures that the equipment runs at optimal efficiency, reducing wear and tear while extending the lifespan of the product. Another noteworthy attribute is the noise reduction technology, which minimizes operational sound, making it ideal for environments where noise levels need to be kept to a minimum.

On the other hand, the JWF507 model is tailored for those who prioritize compactness without compromising performance. Its sleek design makes it a perfect fit for smaller spaces, while its powerful engine ensures that it can handle demanding tasks with ease. The JWF507 also includes advanced safety features such as automatic shut-off systems and overload protection, ensuring user safety and preventing equipment damage.

Both models are equipped with advanced filtering technologies that promote better air quality and energy conservation. They come with durable construction materials that can withstand harsh conditions, ensuring longevity and reliability. Additionally, routine maintenance is simplified with easy access points for cleaning and servicing.

In summary, the GSW JWF657 and JWF507 are engineered for excellence, combining innovative features with user-friendly designs to offer optimal performance. Whether you need high capacity or compact efficiency, these models stand out in the market for their reliability, safety features, and advanced technologies. Users can trust these products to deliver consistent results while being easy to maintain and operate.