Husqvarna MZ5225C / 968999748 Fuel Shut Off Valve, Lifting Lever for the Mower Deck, Controls

CONTROLS

9. Fuel Shut Off Valve

The fuel shut off valve is located at the left rear of the seat. The valve is off when the handle tab is turned perpendicular to the fuel line.

8011-419

Fuel shut off valve in the CLOSED position.

10. Lifting Lever for the Mower Deck

The lifting lever is used to transfer the mower deck from the transport position into the preferred cutting height position.

To set the cutting height, pull out the detent ring and place it in the desired height’s corresponding hole.

To lower the deck from the transport position, press forward on the foot pedal while pulling back on the transport latch. This releases it from the locked position and allows it to ease down to the detent pin, setting the selected cutting height.

IMPORTANT INFORMATION

In order to obtain an even cutting height, it is important that the air pressure in the front tires is 15 psi and the rear tires is 10 psi.

IMPORTANT INFORMATION

Always use the high position to transport.

1

2

3

8061-007

1.Detent Pin

2.Transport latch

3.Foot Pedal

The mower deck’s lifting lever

English-23