Husqvarna MZ6125BF / 968999721, MZ6125C / 968999749 manual Steering Control Levers, Controls

CONTROLS

1. Steering Control Levers

The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the steering controls are moved outward.

When both controls are in the neutral position (N), the machine stands still.

By moving both controls an equal amount forward or backward, the machine moves in a straight line forward or backward respectively.

In order, for example, to turn right while moving forward, move the right control towards the neutral position. The rotation of the right wheel is reduced and the machine turns to the right.

Zero turn can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from its neutral position. The rotation direction when zero turning is determined by which steering control is moved backward behind the neutral position. If the left steering control is pulled backward, the machine turns to the left. Use extra care when using this maneuver.

If the steering controls are in uneven positions when standing still or do not fit in the slots for moving the controls outward, they can be adjusted.

8011-789

Steering controls

WARNING!

The machine can turn very rapidly if one steering control is moved much further forward than the other.

1
2	3
4
	8011-7912

1.Forward

2.Neutral

3.Neutral slot, Neutral lock

4.Reverse

Motion control lever, right side

English-19