Guardian Technologies H1000 warranty Outer Surface of the Unit

Make sure the unit is unplugged.

1.Separate the tank from the body of the unit.

3.Pour cool, clean water directly into the tank. Do not pour anything but water into the tank.

			N	F
		E		AS
	S			T
O	O			E
				N
L

2.Open the tank lid, turning it to the left.

			N	F
		E		AS
	S			T
O	O			E
				N
L

4.Close the tank lid, turning it to the right.

•Always unplug the unit before servicing it in any way.

•Do not submerse the unit in water, or allow water to enter the inside of the unit.

INSIDE THE BODY OF THE UNIT

Pour excess water out of the unit. Wash out the unit with fresh water, using the cleaning brush and a soft cloth as needed.

OUTER SURFACE OF THE UNIT

Wipe the surface of the unit with a soft damp cloth if needed.

WATER TANK

Fill water tank with clean water and shake to remove water scaling.

ULTRASONIC DISK

Remove the water tank (Figure 1) and use the enclosed cleaning brush regularly to remove build up and deposits from this are (Figure 2).

Do not use any detergents or soap as this may damage the ultrasonic disc. This may also disperse detergent or soap residue with mist causing bodily harm.

Do not scrub with finger tips or any sharp objects as this may cause damage to the ultrasonic disc.

If there is red color build up on ultrasonic disk, gently clean with soft cloth and 1-2 drops of white vinegar. Rinse with clean water.

*Clean the disk with the brush only. No other cleaning tool should be used. Brush only. (Fig. 2)

5.Attach the tank to the body of the unit and plug in.

6. Press the button to turn on.

•

•

•

Fully dry the inside and outside of the unit before storing it. DO NOT leave water in the unit.

Store in a cool, dry place.

E-6 E-7