2.Insert four AA batteries into the keyboard.
3.Press and hold the Learn button on the receiver for two seconds, and then release it. The Status light will blink slowly, indicating the receiver is in “Learn Mode.”
4.Press and release the Teach button located on the back of the keyboard (see below). The Status light on the receiver will blink rapidly for four seconds, then begin to blink slowly.
Note: At this time, press the Teach button on any additional devices (such as a second keyboard, an Ultra Mouse, or a GyroRe- mote).
5.To exit Learn Mode, press the Learn button on the receiver for two seconds. Otherwise, Learn Mode will automatically time out after five minutes.
If more than one Gyration device is being installed on the same system, place the receiver into Learn Mode (step 3
2
