Haan HD-60 instruction manual Using the Sweeper Function, Important Vibration Sound

7

Tilt handle at a 45º angle. Push and pull slowly across the floor to clean thoroughly.

8

POWER

STEAM

When done, push ON/OFF button.

9

Place unit with Ultra-microfi- ber pad attached onto Floor Protector / Resting Mat. Allow to cool down for five (5) min.

10

When unit has cooled, remove Ultra-microfiber pad. Store unit upright in a dry area.

IMPORTANT: Vibration Sound

While the unit is turned off, air builds up in the water pump line. This is a common occurrence. When the unit is turned on the water pump pushes air out of the line and emits a vibrating sound. This occurs while the unit is heating up and also when the water tank is emptied during use. If the vibration sound persists for more than 60 seconds during heat up, check to make sure the water tank is assembled correctly.

IMPORTANT

Always empty the water tank once you have finished using your Floor Sanitizer.

Using the Sweeper Function

To turn Sweeper Brush ON/OFF, gently press the “Brush ON/OFF” button located on the back of the unit.

Helpful Hint:

When cleaning floors the steam function and sweeper function can be used at the same time.

9